RSN-2500

Inverted (short cycle) arc stud welding machine RSN-2500

The arc stud welding machine is composed of welding power supply, controller, welding gun, ground wire clamp, welding cable, etc. However, the welding power supply of most welding equipment is integrated with the controller, which is called the host. Different from the welding principle of the energy-storage stud welding machine, the pull-arc stud welding machine has no capacitor charging process. The whole welding process is completed through the discharge of the welding power supply, and the thyristor controls the discharge time. The discharge time is 5-500 milliseconds. The more advanced control method is to use the intelligent control of single chip computer to set and timely control the welding current, welding time and other parameters in the welding process.

Product specifications

Model:   RSN-2500

Input voltage :  3～380V±10%/50Hz

Rated input ccurrent :  163A

Rated input capacitor :  107.5KVA

Unload voltage：80V

Welding speed (pcs/min):   10～35

Rated welding voltage:  32VDC

Efficiency (at maximum output):  80%

Power factor (at maximum output):  0.94

Welding current range:   40A-2500A

Diameter of stud (mm):  Φ 3～ Φ25

Welding time :  0.01～4.0 S

Length of stud:  ≤400 mm

INGRESS PROTECTION:IP21S

Insulation Level:F

Overall weight :  101KG

Overall size :   790×385×900